You are having full WiFi network bars in the bedroom whereas the basement shows no network. Perhaps your work requires you to be in the basement while accessing the internet. What to do then? It’s out of logic to bring all the WiFi network equipment such as a router, modem, and in some cases, all the cables connected to them to the basement. You need something smarter.
Wireless range extenders
They are designed to boost WiFi signal strength in such a way that the network reaches each and every corner of your house or office. The working of wireless extenders goes this way: An extender works as a bridge between your network’s access point and the device that is incapable of receiving WiFi signals. For this, you need to place the extender close enough to both router and device client.
Netgear is the most popular WiFi range extender provider. All you need to do is just choose the perfect model to suit your needs and you can access the web even outside your house like in the patio or garage. Some of the features of Netgear extenders include dual-band support, Access Point Mode, WPS push, and FastLane technology.
The most loved thing about Netgear WiFi extenders is that they are simple to set up. For your ease, we have described step-by-step guide to two ways for performing Netgear extender setup. You just need to enter into mywifiext and you’re good to go.
- Manual Method
If your range extender doesn’t feature an Ethernet port, follow these steps to set it up:
- Launch an Internet browser on your computer with a network connection
- Enter into www.mywifiext.net
- Enter default username and password in the required fields
- On the Netgear Genie Setup page, click on New Extender Setup
- Follow the onscreen instructions to select the access point (or main router) with which you want to connect your WiFi extender
Once complete, you are ready to enjoy WiFi signals in all areas of your house.
In case your extender features an Ethernet port, you can set it up manually for enjoying better security. Here’s how you can do it:
- After placing your extender at a good place, plug it in a socket
- Wait while it turns on completely
- When done, attach one end of an Ethernet cable with it and the other end with a computer
- Go to www.mywifiext.net and type in your default extender login details
- Once in, select the Wireless Settings on the left side of the page
- Provide the same password as of your home router
Now, connect your WiFi devices with your Netgear wireless extender. In case you are struck anywhere during the process or need assistance regarding the options and terms, you can contact WiFiExtAssist professionals to help you online.
- WPS Method
One nice feature about Netgear wireless extenders is that they support WPS technology. WPS or WiFi Protected Setup is a technology that makes it easier for multiple WiFi devices to connect with the same network by using one tap of a button.
This is certainly a faster method but security experts always recommend manual methods as you can configure the settings according to your preferences and set up hi-end encryptions.
To get started with the WPS method, follow the instructions below:
- Keep your extender in the same room as your router
- Plug it in a socket and activate it
- Establish a connection either with wired or wireless network
- When a list of WiFi networks show up, select your preferred one
- Move on to your computer and open a web browser
- When you are in www.mywifiext.net, click on WiFi Range Extender Setup
- Select a connection and click on Continue
- Provide your login credentials
- Once in, you can change the SSID as per your choice. Click on the Save button
That’s it! You can connect any WiFi device with your WiFi network by using your Netgear range extender this way.