Tuesday, September 26, 2023
- Advertisment -
HomeTechnology & GadgetsEasy Ways to Set Your Antenna For Better Tv Reception

Easy Ways to Set Your Antenna For Better Tv Reception

Some clever person opined that getting a clear TV signal has one thing in common with the real estate; it is all about location. Indeed, it cannot be put better. For you to get the best signal for your TV, you have to place your antenna in the most suitable direction.


This notwithstanding, other factors will also determine the quality of the signal you get, Understanding how each one of them affects the performance of your TV is necessary. It must also be considered that digital television has generally changed the TV landscape and introduced higher levels of voice and color clarity.


In the discussion that follows, we look into some factors and ways to set your antenna for better TV reception.


Find out Where TV Transmitters are Located

Ideally, in many jurisdictions, transmitters for several Tv stations are placed centrally as a matter of regulatory requirement. In this consideration, it is easy to direct your antenna towards this location for a better signal. It is, however, important to note that this central placement of transmitters is not applicable everywhere and different channels may transmit from all directions of the compass.


Even before you purchase an antenna, try to establish the location of TV transmitters as this will also inform the strength of the TV you want to buy. If you are unable to pick establish the location of TV transmitters, some websites can give guidelines and you can also reach out Signal Solutions Sunshine Coast.


It’s important to know that being too close to the transmitters may also cause distortion when the signal is too strong for your antenna. You can use an attenuator to reduce or regulate the strength of the signal. It’s advisable to consult a technician to help you pick the right kind of attenuator.

Place Your Antenna high

Perhaps this is one of the easiest and most common solutions to getting a better TV signal. Whatever your location, placing your antenna high atop a building nearly guarantees you perfect reception. This ensures that your antenna receives a TV signal with little inhibition from obstacles in between.


If you have to place your antenna within your room, try to place it near the window if possible. Generally, antennas placed outside the building tend to pick more signals than the ones indoors. However, if placed right and set in the right direction, your antenna may still receive quality signal while at it, just keep your coaxial cable short enough because long cable may just distort the quality of your signal.


TV sets Sharing a Single Antenna

Ultimately, if more than one TV set is using the same antenna, there are higher chances that the signal will be hampered. The more the TVs, the weaker the signal gets. You may need to boost this effect using a digital box or any other relevant method. If you still have challenges with your antenna, trying using an amplifier to boost the signal strength. This is specifically useful when feeding your signal to more than one TV set


Avoid Location With Obstacles

The geographical location of your home and vis a vis that of the tv transmitters will considerably dictate the quality of signal you get. Physical obstacles such as trees, hills, metal roofs, solar panels among others cause obstruction to indoor signals and those placed in the attic. This is further aggravated by weather patterns such as wind and rain and some electrical equipment in your vicinity.


 It is not entirely possible to avoid all these obstacles as you set up your antenna. However, if you can’t hack your way into a great signal, try as much as possible to navigate these obstacles and see whether you get changes.


Go For A Strong Antenna

If you want to pick signals for several channels from different directions, avoid using a directional antenna and instead go for one that can make use of all directions(omnidirectional antenna).


Generally, a stronger antenna increases the chances of a better signal for you especially when it can tap the signal from the best direction. Consult with your vendor or a local technician to ensure that you make use of the best.


It is also important to understand the role of both UHF and VHF bands so that you are in a position to set your antenna for the appropriate channel. When TV was still analog, most TV stations utilized the VHF band, but it is now UHF and VHF bands, thus you want an antenna that can work on both bands to receive the stations you can.


Rescan To Get Channels

Sometimes the settings might be right but all you need to do is to rescan the channels afresh. It can be done periodically, especially if there are changes in frequencies for TV channels. This can be done at least once a month or whenever there is interference with frequency settings. Try this remedy as part of your set up to get a clearer signal from your antenna.



Sometimes, you will be required to test around a few locations to get the appropriate signal. You also need to check and confirm that all the connections from the antenna to the TV set is correctly done and the coaxial cable isn’t broken. Also, note that changes may be necessary from time to time and you can try out various DIY methods to get a clear signal from your antenna. If you have challenges, consult technicians within your area.


Sagar Mandan
Sagar Mandan
Sagar Mandan is HR and Content Editor at Techssocial. He has written and share many good and informative articles on various websites and niche like technology, web design, graphic design, marketing, business, social media, search engine optimization, etc. He loves to share knowledge and experience with his friends and colleagues.
- Advertisment -

Most Popular

- Advertisement -

All Categories

- Advertisment -