A glass bead sterilizer is a device that is used to disinfect small equipment made up of glass or metal. The device heats up glass beads to disinfect the equipment rapidly in 10 seconds. This formula was applied to use a non-flammable technique in order to disinfect metal related items. You can never see the glass beads melt because it is done in a dry manner inside an iron chamber. The use of this technology destroys bacteria, fungal infections, and viruses from the surface of the metal and makes it appropriate for human use. So, before you check glass bead sterilizer cost, here are a few things you should know about.
What are the uses of a glass bead sterilizer?
1. Sterilizing instruments at a beauty salon
You might have seen a lot of metal and glass equipment in a beauty salon. How do you think they are getting sanitized without getting wet? Well, the answer is buying a glass bead sterilizer online! How does this work?
- This device is nothing but a small unit with a small cup in the middle. Keeping the metal equipment like scissors, tweezers, knives, etc., in that cup will help it disinfect in about 10 seconds. That is the fastest way for a process like disinfecting. So, when an employee enters the salon, the first thing they do is switch the device on. The glass beads inside the unit heat at around 300 degrees which is super-hot to kill all the viruses and bacteria present on the surface of the equipment. When the device is ready, it will automatically switch the light off, indicating you put the tools inside the cup. After ten to twelve seconds, you will see that the tools are ready to use.
- There has been a lot of argument about the fact that glass beads do not heat enough to kill the germs, and it is difficult to believe that the technology doesn't leave a single trace of bacteria on the tools. Because of this fact, it is important for anyone to buy the device carefully. It should always be by a trusted manufacturer.
2. Hand instruments at a dentists’ clinic
This instrument is also the main part of the sterilization process in endodontic dentistry. The sterilizer is heated at a temperature of 225 degrees, followed by which the tools to be used are dipped in hot beads. The industry makes sure that these beads are not more than 1mm in order to be effective. If they are too big in size, it might also get difficult for them to transfer the heat properly. Studies have shown that this device has the capability to sterilize small-handed instruments in just a few seconds.
Where can you buy the product?
The sterilizer will be available on various websites, so you can order it in bulk if you have a larger requirement or you can purchase just a single piece. One glass bead sterilizer cost will be around 3000 to 5000 INR each and the delivery might take around 12-15 days.
How to use this sterilizer?
Using the device is not much of a complicated task. Let us know how to use it step by step:
- To, start the initial step is to turn the instrument on. To do this, you will find a start button in the front panel. The moment you turn the device on, you will see an eight on display.
- Just after a few seconds, you have to get back and check the temperature. Usually, it's 250 degrees where you dip the tools in. You can increase or decrease the temperature according to your needs too.
- Once the light starts to flicker; it's time for you to dip the tools for about ten to twelve seconds.
- If you wish to restart the device, you will have to press the start/stop button twice, and you are ready to go!
Sterilization of instruments has become an essential pointer and cannot be neglected. A lot of spas, hair, and nail salons have started buying glass beads sterilizers online as customers ask for sanitizing the equipment before use. When it comes to customer satisfaction, there has to be a way to give them the best. The best part about the sterilizer is that it is an inexpensive way to keep your chamber neat as well as hygienic. So, what are you waiting for? Order one for yourself today!