There are certain things in our home without which our life can be a real struggle. One of those things is definitely the hot water system installed in our houses. As the name suggests, the hot water system provides consistent hot water supply by making use of different kinds of heating methods like electric, gas or solar power. Whatever your needs might be, you can blindly depend on your hot water system to provide you with fresh hot water, whenever the need arises.
Also, in order to ensure that your hot water system is working properly, you have to keep a close eye on it, and provide proper maintenance. Without those, myriad parts can stop working properly and start showing various issues. Now, who would want to wake up on a chilly morning, only to find out that the supply of hot water has stopped? To avoid such disappointing situations, make sure to check the water heating system from time to time, and also call professional for water leak detection in Perth, A. Able Plumbing, Gas & Hot Water has been providing professional plumbing services for two decades. They believe in being professional while handling crises, and aim to provide the best quality service.
Ways to fix leaking water heating system
There are many things that can go wrong with your water heating system. For this exact reason, it is always better to check it up once in a while or seek help from professionals for proper maintenance. However, if you feel in your gut that something is not right and yet decided to wait till the very end, things can become too serious. Your work doesn’t stop at hot water installation in Perth, after that you need to take proper care in order to ensure uninterrupted flow of hot water. Here are a few ways on how you can fix water leakage:
- Identify: The very first and the most important step is to identify from where the leakage is taking place. The most common place of leak is at the pressure relief valve. It generally occurs when excessive pressure builds up inside the tank. Even though it is the easiest one to fix, it is also the most alarming cause. You could just lift the valve 2 or 3 times and that should do the work of fixing the leak by clearing out any blockage that might be present. However, if things take a turn for the worse, then it’s a clear indication that you need to buy a new valve to replace the one that has worn out. Also the plumbing pipes and the various joints are a common place to find water leakage. Leaking or dripping water from the pipes can seem to be coming directly from the water heater. Leak can also originate from the drain valve or the tank.
- Turn off: The next step should be to simply turn off the water heater’s water valve that is there on the inlet pipe. However, before turning off the water mains, it is advisable to fill up a bucket or two with water for the daily chores and other emergencies. Also, don’t forget to fill up the jugs and bottles in the kitchen for cooking and drinking purposes, as there will be absolutely no water running in the house. If you find it challenging to locate the water mains’ valve for turning it off, then seek help from a professional, as they will know where it is located.
- Seek help: DIY and taking things in your own hands can fix problems related to hot water system for a little while, and is fine when you are in a hurry and have no time to wait. However, it can never be a permanent solution. So it is always advisable to seek help from professionals as soon as you detect leakage from the water heating system. They will immediately identify the core of the problem and fix it right then to prevent things from getting serious.
These are the few steps that you can follow as soon as you detect any sort of leakage from the water heating system. You might feel that it is not a big deal, but it can be a warning sign for something grave. So don’t wait for too long and get it checked.