Friday, June 9, 2023


If you have an Epson printer and your prints are coming out faint, streaked with lines, incomplete, chances are you have a clogged nozzle – a common issue many users have with Epson printers. Print heads inevitably clog over time as small amounts of ink residue dry up and collect in the nozzles. Being prudent about replacing the cartridges promptly when the low ink alert goes off can do a lot to prevent ink from drying inside the nozzles. However, you may end up with one or various still get clogged for a different reason. Blocked printheads can occur regardless if you use original Epson or aftermarket cartridges. This could also lead to the Epson printer black ink not working issues along with others. So, to fix such error codes and problems, you can try the below solutions.

Effective Solutions For Epson Printer Error Codes

Some basic things to start with are using the below troubleshooting steps to fix the problem as soon as possible.

#1. FIX Epson Printer Black Ink Not Working 

You can follow the steps given below for this most common issue most people encounter with the Epson printer. 

  • First of all, you have to turn off the printer and unplug from the power source and disconnect USB cables. After a few moments, then reconnect your printer and plug it back in. Then turn your printer back on. 

  • Now, print a quality diagnostic report or print a test page. You can often find this option on your printer’s display screen. Or check your printer’s user guide for step-by-step procedure. 

  • Now, you need to check printer ink levels to double-check the ink volume in the cartridges. If you are using the aftermarket cartridges that do not show ink levels, we will have to figure out another way to determine whether or not your ink cartridges are at fault. 

Now, you also need to check your ink cartridges that are low on ink or even empty. Then replace the ink cartridges that will probably fix Epson printer black ink not working problems. 

#2. Resolve Epson printer error code 0x97

The Epson 0x97 error code warns whether you encounter an internal hardware issue with the printer. It is mostly due to a motherboard malfunction or some other kind of internal component malfunction. Once this error shows up on the screen, it is likely because some internal components of your printer are not functioning correctly. If you encounter Epson printer error code 0x97then do not panic. The following steps will help you fix the issue quickly. 

  • Try cleaning the print head. Remove each ink cartridge one by one from the printhead. Then place the ink cartridges on the top of a clean paper or towel. Then you need to remove the printhead from the printer carefully. 

  • Now, wipe the bottom of the printhead thoroughly using a clean, lint-free cloth damped in warm water. It would be best if you cleaned the nozzle area until there is no more black ink sticking on the fabric. 

  • Next, soak the printhead in a bowl with warm water for at least 10 mins. Do not use the boiled water. You need to put a clean paper towel at the base and then let the printhead rest above it while soaking. Take out the printhead from the bowl and carefully wipe off any water and moisture using a dry lint-free cloth. 

  • Then you need to place the printhead on the top of the paper towel and allow it to air-dry for 15 mins. Then you need to insert the printhead back into the carriage and reinstall all the cartridges into the respective slots. Finally, turn on your printer and see if there are any changes. 

Most of the time, this solution also works with the Epson XP 320 error code 0xeaYou can follow the above steps carefully and fix the error codes. 

- Advertisment -

Most Popular

All Categories

- Advertisment -