Friday, June 2, 2023
HomeBusinessHow to prep and paint kitchen cabinets?

How to prep and paint kitchen cabinets?

Painting kitchen cabinets is a great way to update your kitchen without having to spend lots of money. It's also not very difficult, but some vital points to consider before starting the DIY process. Preparation is key. So, be sure the surface is clean and dry before you begin painting. So, wash down all surfaces with soap and water, use an abrasive cleaner if needed.

Furthermore, wipe everything down with a paper towel or rags soaked in alcohol (to remove any grease). Allow the surfaces to dry completely before continuing with your project. But before that, gather all that you need for the project.

Materials required:

  • Paint
  • Square paint brush
  • Roller
  • Angled brush
  • A sprayer (if needed)

Plan the space and prep the room for paint:

Whether you are just refinishing or doing a new kitchen, you have to clean all the surfaces and empty the cabinets. In addition, remove all shelves, counters, and electrical devices. Use plastic sheets to cover the counter and sink area. Also, protect the windows, backsplash, and free-standing appliances such as your refrigerator and oven. 

Once the kitchen is clear for painting the cabinets, go on with the steps below:

  1. Set up a compact paint station
  2. Remove the drawers, doors, and shelves
  3. Clean all the parts
  4. Prime the cabinet boxes
  5. Sand and caulk them
  6. Finally, paint the boxes
  7. Paint the doors, drawers, and shelves
  8. Reinstall all the cabinet parts

Set up a compact paint station:

After prepping the room, the first step is to set up a paint station. Place the ladder and the paint station in such a way that cabinets are easily accessible. Then screw the eye hooks to hand the paint bucket. Look for aline cabinet reviews to make up your mind. 

Remove the drawers, doors, and shelves:

The second step is to remove the doors, drawers, and shelves of the kitchen cabinets. For that, back out the hinge screws and remove the cabinet doors. In addition, remove the hardware or cover it with tape. After removing the hinges, remove the tape and stick a fresh one of the wooden frames.

Clean all the parts:

Before starting the main task, clean all the parts of the cabinets thoroughly. Use a regular cleaner or soap to clean the grime, grease, oil spots, and extra dust from the cabinet doors. But, make sure to use a good cleaner to clean all the cabinet parts. Once all of them are clear, rinse them with water and let them dry completely. Now, scrub all the pieces with a strong deglosser and let them evaporate immediately. 

Prime the cabinet boxes:

In general, it is confusing for some people while choosing a good primer as there are so many choices. But, you will need an oil-based primer and paint in your color of choice. Also, make sure to follow the directions on both the primer and paint cans. It is best to apply at least two coats of primer so that it is completely covered. 

Once that dries fully (check the can for drying time), add two or three coats of paint. Always start with one stroke on the entire box. Let it dry, and then coat again.

Sand and caulk them:

After priming the surfaces, sand the cabinet for kitchen with a sanding sponge. After that, apply the smooth caulk to the sanded area. Moreover, fill the dents and scratches on the cabinet boxes and doors (if any). If the primer is still peaking, apply sand in that part again. 

Finally, paint the boxes:

Well, you are ready to paint your cabinets now. If the former color is light, you will only need one coat. But, it will be tough to paint a light color on a former dark finish. So, work from top to bottom and smoothly apply the coat. Furthermore, use a roller for the exterior finish and a mini roller for the interior of the cabinet boxes. Sand the surfaces in between the paint coats for professional finishing. 

Paint the doors, drawers, and shelves:

Now use the same steps for prepping cabinet drawers, doors, and shelves. Do this work on a tabletop to reduce the paint dripping and apply the paint. In addition, start with the main surfaces and then go for the panels, rails, and slits. 

Reinstall all the cabinet parts:

When the final coat dries, put back all the pieces as they were. Remove the tapes and install the hinges and knobs back into the joints. And reinstall the drawer pulls. The aline cabinets reviews might help you. 


Removing everything from the space is the best way to paint the kitchen cabinets. So, remove all the cabinets, drawers, and shelves to scrub every surface down for painting. Preparing the room will ensure convenient priming and sanding before paint application. Follow these simple steps and gather the material DIY paint your kitchen cabinet with minimal effort!

- Advertisment -

Most Popular

All Categories

- Advertisment -