So, you have set up your Netgear extender! But what is this? Your extender is not connecting to the internet? Not to worry! In this post, we will make you familiar with all the troubleshooting tips to fix Netgear extender not connecting to the internet issue in no time. Let’s get the ball rolling!
Prior to delving into basic and advance troubleshooting tips to fix the issue, let us first guide you identify whether your extender is disconnected to the WiFi network/ internet. The “Netgear extender not connecting to the internet” issue comes into view in the following scenarios:
No internet LED on Netgear WiFi range extender.
Red and amber power LED.
Extender connected but no internet access.
Lost internet connection or no internet connectivity.
WiFi connected but can’t access the internet.
Can’t access internet on my devices after Netgear WiFi extender setup.
Netgear Extender Not Connecting to the Internet: Basic Troubleshooting Tips
Go With Power Cycling
Disconnect all the devices that are connected to your Netgear extender.
Unplug your extender.
Wait for a few minutes.
Plug in back your Netgear extender again.
Connect your WiFi-enabled devices to the extender’s WiFi network.
Access mywifiext login page to see whether your internet is working fine.
Check All the Connections
The next troubleshooting tip to get rid of Netgear extender won’t connect to the internet is to check all the connections. Make sure that you have properly connected your Netgear extender to your router with a well-maintained and non-damaged Ethernet cable.
Check the Placement
To fix the issue, we suggest you place your Netgear WiFi extender in reach of your existing router. Besides, you can also connect your Netgear extender to the router wirelessly. For this, you have to search for your router’s WiFi network and connect your range extender with it.
Check the Power
Your Netgear extender must receive a fluctuation-free and continuous power supply from a working wall outlet. Once your Netgear extender is properly plugged in, it should display a solid green LED on it.
Netgear Extender Not Connecting to the Internet: Advance Troubleshooting Tips
Update Your Netgear Extender Firmware
Obsolete version of firmware on your Netgear extender may also result in the issue. So, to fix it, make sure to update your extender’s firmware whenever it is available. You can easily update Netgear extender’s firmware by visiting its default login page via 192.168.1.250 or www.mywifiext.net.
Reset Your Netgear WiFi Range Extender
None of the troubleshooting tips mentioned above has resolved the issue for you? Fret not! Opt for resetting your Netgear extender now. The Netgear extender reset process will wipe out all the personalized settings of your Netgear extender, including username, password, setup process, and security settings.
All you have to do is, with the help of a paper clip or pin, press and hold the reset hole on your Netgear WiFi range extender for some time and release it after that.
You’re all done! Your Netgear WiFi range extender resets successfully. You can now take the plunge to set it up using the default settings, mywifiext.net login web address, username and password.
After setting up your Netgear extender, you can connect your WiFi-enabled devices to its default SSID and enjoy the blazing-fast speed of the internet all over.
We hope that our troubleshooting guide has helped you resolve “Netgear extender won’t connect to the internet” issue. Which method was helpful? Please share your feedback with us via comments. And if the same issue is still bothering you, please ask for quick assistance from our technicians. They will help you fix the issue in matter of minutes.